import itertools

import numpy as np
import pytest
from scipy import ndimage as ndi

from skimage import draw
from skimage._shared import testing
from skimage._shared.testing import assert_allclose, assert_almost_equal, assert_equal
from skimage._shared.utils import _supported_float_type
from skimage.measure import (
    centroid,
    inertia_tensor,
    inertia_tensor_eigvals,
    moments,
    moments_central,
    moments_coords,
    moments_coords_central,
    moments_hu,
    moments_normalized,
)


def compare_moments(m1, m2, thresh=1e-8):
    """Compare two moments arrays.

    Compares only values in the upper-left triangle of m1, m2 since
    values below the diagonal exceed the specified order and are not computed
    when the analytical computation is used.

    Also, there the first-order central moments will be exactly zero with the
    analytical calculation, but will not be zero due to limited floating point
    precision when using a numerical computation. Here we just specify the
    tolerance as a fraction of the maximum absolute value in the moments array.
    """
    m1 = m1.copy()
    m2 = m2.copy()

    # make sure location of any NaN values match and then ignore the NaN values
    # in the subsequent comparisons
    nan_idx1 = np.where(np.isnan(m1.ravel()))[0]
    nan_idx2 = np.where(np.isnan(m2.ravel()))[0]
    assert len(nan_idx1) == len(nan_idx2)
    assert np.all(nan_idx1 == nan_idx2)
    m1[np.isnan(m1)] = 0
    m2[np.isnan(m2)] = 0

    max_val = np.abs(m1[m1 != 0]).max()
    for orders in itertools.product(*((range(m1.shape[0]),) * m1.ndim)):
        if sum(orders) > m1.shape[0] - 1:
            m1[orders] = 0
            m2[orders] = 0
            continue
        abs_diff = abs(m1[orders] - m2[orders])
        rel_diff = abs_diff / max_val
        assert rel_diff < thresh


@pytest.mark.parametrize('anisotropic', [False, True, None])
def test_moments(anisotropic):
    image = np.zeros((20, 20), dtype=np.float64)
    image[14, 14] = 1
    image[15, 15] = 1
    image[14, 15] = 0.5
    image[15, 14] = 0.5
    if anisotropic:
        spacing = (1.4, 2)
    else:
        spacing = (1, 1)
    if anisotropic is None:
        m = moments(image)
    else:
        m = moments(image, spacing=spacing)
    assert_equal(m[0, 0], 3)
    assert_almost_equal(m[1, 0] / m[0, 0], 14.5 * spacing[0])
    assert_almost_equal(m[0, 1] / m[0, 0], 14.5 * spacing[1])


@pytest.mark.parametrize('anisotropic', [False, True, None])
def test_moments_central(anisotropic):
    image = np.zeros((20, 20), dtype=np.float64)
    image[14, 14] = 1
    image[15, 15] = 1
    image[14, 15] = 0.5
    image[15, 14] = 0.5
    if anisotropic:
        spacing = (2, 1)
    else:
        spacing = (1, 1)
    if anisotropic is None:
        mu = moments_central(image, (14.5, 14.5))
        # check for proper centroid computation
        mu_calc_centroid = moments_central(image)
    else:
        mu = moments_central(
            image, (14.5 * spacing[0], 14.5 * spacing[1]), spacing=spacing
        )
        # check for proper centroid computation
        mu_calc_centroid = moments_central(image, spacing=spacing)

    compare_moments(mu, mu_calc_centroid, thresh=1e-14)

    # shift image by dx=2, dy=2
    image2 = np.zeros((20, 20), dtype=np.double)
    image2[16, 16] = 1
    image2[17, 17] = 1
    image2[16, 17] = 0.5
    image2[17, 16] = 0.5
    if anisotropic is None:
        mu2 = moments_central(image2, (14.5 + 2, 14.5 + 2))
    else:
        mu2 = moments_central(
            image2, ((14.5 + 2) * spacing[0], (14.5 + 2) * spacing[1]), spacing=spacing
        )
    # central moments must be translation invariant
    compare_moments(mu, mu2, thresh=1e-14)


def test_moments_coords():
    image = np.zeros((20, 20), dtype=np.float64)
    image[13:17, 13:17] = 1
    mu_image = moments(image)

    coords = np.array(
        [[r, c] for r in range(13, 17) for c in range(13, 17)], dtype=np.float64
    )
    mu_coords = moments_coords(coords)
    assert_almost_equal(mu_coords, mu_image)


@pytest.mark.parametrize('dtype', [np.float16, np.float32, np.float64])
def test_moments_coords_dtype(dtype):
    image = np.zeros((20, 20), dtype=dtype)
    image[13:17, 13:17] = 1

    expected_dtype = _supported_float_type(dtype)
    mu_image = moments(image)
    assert mu_image.dtype == expected_dtype

    coords = np.array(
        [[r, c] for r in range(13, 17) for c in range(13, 17)], dtype=dtype
    )
    mu_coords = moments_coords(coords)
    assert mu_coords.dtype == expected_dtype

    assert_almost_equal(mu_coords, mu_image)


def test_moments_central_coords():
    image = np.zeros((20, 20), dtype=np.float64)
    image[13:17, 13:17] = 1
    mu_image = moments_central(image, (14.5, 14.5))

    coords = np.array(
        [[r, c] for r in range(13, 17) for c in range(13, 17)], dtype=np.float64
    )
    mu_coords = moments_coords_central(coords, (14.5, 14.5))
    assert_almost_equal(mu_coords, mu_image)

    # ensure that center is being calculated normally
    mu_coords_calc_centroid = moments_coords_central(coords)
    assert_almost_equal(mu_coords_calc_centroid, mu_coords)

    # shift image by dx=3 dy=3
    image = np.zeros((20, 20), dtype=np.float64)
    image[16:20, 16:20] = 1
    mu_image = moments_central(image, (14.5, 14.5))

    coords = np.array(
        [[r, c] for r in range(16, 20) for c in range(16, 20)], dtype=np.float64
    )
    mu_coords = moments_coords_central(coords, (14.5, 14.5))
    assert_almost_equal(mu_coords, mu_image)


def test_moments_normalized():
    image = np.zeros((20, 20), dtype=np.float64)
    image[13:17, 13:17] = 1
    mu = moments_central(image, (14.5, 14.5))
    nu = moments_normalized(mu)
    # shift image by dx=-2, dy=-2 and scale non-zero extent by 0.5
    image2 = np.zeros((20, 20), dtype=np.float64)
    # scale amplitude by 0.7
    image2[11:13, 11:13] = 0.7
    mu2 = moments_central(image2, (11.5, 11.5))
    nu2 = moments_normalized(mu2)
    # central moments must be translation and scale invariant
    assert_almost_equal(nu, nu2, decimal=1)


@pytest.mark.parametrize('anisotropic', [False, True])
def test_moments_normalized_spacing(anisotropic):
    image = np.zeros((20, 20), dtype=np.double)
    image[13:17, 13:17] = 1

    if not anisotropic:
        spacing1 = (1, 1)
        spacing2 = (3, 3)
    else:
        spacing1 = (1, 2)
        spacing2 = (2, 4)

    mu = moments_central(image, spacing=spacing1)
    nu = moments_normalized(mu, spacing=spacing1)

    mu2 = moments_central(image, spacing=spacing2)
    nu2 = moments_normalized(mu2, spacing=spacing2)

    # result should be invariant to absolute scale of spacing
    compare_moments(nu, nu2)


def test_moments_normalized_3d():
    image = draw.ellipsoid(1, 1, 10)
    mu_image = moments_central(image)
    nu = moments_normalized(mu_image)
    assert nu[0, 0, 2] > nu[0, 2, 0]
    assert_almost_equal(nu[0, 2, 0], nu[2, 0, 0])

    coords = np.where(image)
    mu_coords = moments_coords_central(coords)
    assert_almost_equal(mu_image, mu_coords)


@pytest.mark.parametrize('dtype', [np.uint8, np.int32, np.float32, np.float64])
@pytest.mark.parametrize('order', [1, 2, 3, 4])
@pytest.mark.parametrize('ndim', [2, 3, 4])
def test_analytical_moments_calculation(dtype, order, ndim):
    if ndim == 2:
        shape = (256, 256)
    elif ndim == 3:
        shape = (64, 64, 64)
    else:
        shape = (16,) * ndim
    rng = np.random.default_rng(1234)
    if np.dtype(dtype).kind in 'iu':
        x = rng.integers(0, 256, shape, dtype=dtype)
    else:
        x = rng.standard_normal(shape, dtype=dtype)
    # setting center=None will use the analytical expressions
    m1 = moments_central(x, center=None, order=order)
    # providing explicit centroid will bypass the analytical code path
    m2 = moments_central(x, center=centroid(x), order=order)
    # ensure numeric and analytical central moments are close
    # TODO: np 2 failed w/ thresh = 1e-4
    thresh = 1.5e-4 if x.dtype == np.float32 else 1e-9
    compare_moments(m1, m2, thresh=thresh)


def test_moments_normalized_invalid():
    with testing.raises(ValueError):
        moments_normalized(np.zeros((3, 3)), 3)
    with testing.raises(ValueError):
        moments_normalized(np.zeros((3, 3)), 4)


def test_moments_hu():
    image = np.zeros((20, 20), dtype=np.float64)
    image[13:15, 13:17] = 1
    mu = moments_central(image, (13.5, 14.5))
    nu = moments_normalized(mu)
    hu = moments_hu(nu)
    # shift image by dx=2, dy=3, scale by 0.5 and rotate by 90deg
    image2 = np.zeros((20, 20), dtype=np.float64)
    image2[11, 11:13] = 1
    image2 = image2.T
    mu2 = moments_central(image2, (11.5, 11))
    nu2 = moments_normalized(mu2)
    hu2 = moments_hu(nu2)
    # central moments must be translation and scale invariant
    assert_almost_equal(hu, hu2, decimal=1)


@pytest.mark.parametrize('dtype', [np.float16, np.float32, np.float64])
def test_moments_dtype(dtype):
    image = np.zeros((20, 20), dtype=dtype)
    image[13:15, 13:17] = 1

    expected_dtype = _supported_float_type(dtype)
    mu = moments_central(image, (13.5, 14.5))
    assert mu.dtype == expected_dtype

    nu = moments_normalized(mu)
    assert nu.dtype == expected_dtype

    hu = moments_hu(nu)
    assert hu.dtype == expected_dtype


@pytest.mark.parametrize('dtype', [np.float16, np.float32, np.float64])
def test_centroid(dtype):
    image = np.zeros((20, 20), dtype=dtype)
    image[14, 14:16] = 1
    image[15, 14:16] = 1 / 3
    image_centroid = centroid(image)
    if dtype == np.float16:
        rtol = 1e-3
    elif dtype == np.float32:
        rtol = 1e-5
    else:
        rtol = 1e-7
    assert_allclose(image_centroid, (14.25, 14.5), rtol=rtol)


@pytest.mark.parametrize('dtype', [np.float16, np.float32, np.float64])
def test_inertia_tensor_2d(dtype):
    image = np.zeros((40, 40), dtype=dtype)
    image[15:25, 5:35] = 1  # big horizontal rectangle (aligned with axis 1)
    expected_dtype = _supported_float_type(image.dtype)

    T = inertia_tensor(image)
    assert T.dtype == expected_dtype
    assert T[0, 0] > T[1, 1]
    np.testing.assert_allclose(T[0, 1], 0)

    v0, v1 = inertia_tensor_eigvals(image, T=T)
    assert v0.dtype == expected_dtype
    assert v1.dtype == expected_dtype
    np.testing.assert_allclose(np.sqrt(v0 / v1), 3, rtol=0.01, atol=0.05)


def test_inertia_tensor_3d():
    image = draw.ellipsoid(10, 5, 3)
    T0 = inertia_tensor(image)
    eig0, V0 = np.linalg.eig(T0)
    # principal axis of ellipse = eigenvector of smallest eigenvalue
    v0 = V0[:, np.argmin(eig0)]

    assert np.allclose(v0, [1, 0, 0]) or np.allclose(-v0, [1, 0, 0])

    imrot = ndi.rotate(image.astype(float), 30, axes=(0, 1), order=1)
    Tr = inertia_tensor(imrot)
    eigr, Vr = np.linalg.eig(Tr)
    vr = Vr[:, np.argmin(eigr)]

    # Check that axis has rotated by expected amount
    pi, cos, sin = np.pi, np.cos, np.sin
    R = np.array(
        [[cos(pi / 6), -sin(pi / 6), 0], [sin(pi / 6), cos(pi / 6), 0], [0, 0, 1]]
    )
    expected_vr = R @ v0
    assert np.allclose(vr, expected_vr, atol=1e-3, rtol=0.01) or np.allclose(
        -vr, expected_vr, atol=1e-3, rtol=0.01
    )


def test_inertia_tensor_eigvals():
    # Floating point precision problems could make a positive
    # semidefinite matrix have an eigenvalue that is very slightly
    # negative.  Check that we have caught and fixed this problem.
    image = np.array(
        [
            [1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
            [0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0],
            [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1],
        ]
    )
    # mu = np.array([[3, 0, 98], [0, 14, 0], [2, 0, 98]])
    eigvals = inertia_tensor_eigvals(image=image)
    assert min(eigvals) >= 0